SignalTraffic Forums

by **TacomaJoe** on Sun Mar 17, 2013 9:56 pm

Well I have one of the 102 controllers and it is in a "M" cabinet BUT
does any one have any paper work on the controller or the hook up in the cabinet?

I'd bet the 102 is a NEMA 2 phase controller and the pinout for the "A" cable should be all you need.

The cabinet pictured looked like a ped crossing with one phase of veh and one phase of ped. Your controller can handle a simple intersection with ped both directions.

We have a couple of Automatic Signal cabinets but ours are for the 8 phase big brother: 118M

by **John3250** on Sun Mar 17, 2013 10:47 pm

yes it is a NEMA A and only has one cable but since I have no info on the cabinet I need to learn a bit more on it's set up. 2nd cabinet I got when I got this one has a 27 pin jones plug a place for load packs (they are load packs and not relay set up) and flasher. No conflick monitor so I have no thought what kind of controller it was set up for. But it has 6 to 8 loop hook ups.
Also it is an Automatical Signal cabinet,

John

by **Crunge98** on Mon Mar 18, 2013 7:55 am

I cant tell from the pics but it looks like you need to find a conflict monitor and your ready to go :thumbsup:

by **John3250** on Wed Apr 17, 2013 1:01 pm

that green controller cabinet do you have a controller for it?
if so what model does it take?
if not is it available? maybe the inside items?

thanks JOhn

SignalTraffic Forums

LFE SERIES 102 TRAFFIC CONTROLLER

Re: LFE SERIES 102 TRAFFIC CONTROLLER

Re: LFE SERIES 102 TRAFFIC CONTROLLER

Re: LFE SERIES 102 TRAFFIC CONTROLLER

Re: LFE SERIES 102 TRAFFIC CONTROLLER

Who is online