SignalTraffic Forums

by **jab8356** on Fri Aug 09, 2013 8:51 pm

Crunge98 wrote:
mcha9797 wrote:
Crunge98 wrote:There teeco, about the same as darley

Give me a call tomorrow and I'll explain

Which leaves everyone else out. :rant:

by **mcha9797** on Sat Aug 10, 2013 8:30 am

Don't the amber's need to be wired 2 and 2, not all together??

by **jab8356** on Sat Aug 10, 2013 8:33 am

mcha9797 wrote:Don't the amber's need to be wired 2 and 2, not all together??

It was done both ways I think. For example, a Darley 3 bulb would show yellow in all directions when changing.

by **mcha9797** on Sat Aug 10, 2013 8:39 am

jab8356 wrote:
mcha9797 wrote:Don't the amber's need to be wired 2 and 2, not all together??

It was done both ways I think. For example, a Darley 3 bulb would show yellow in all directions when changing.

Then I couldn't connect this light to my Darley controller without re-wiring the signal. :cry:

by **jab8356** on Sat Aug 10, 2013 8:51 am

mcha9797 wrote:
jab8356 wrote:
mcha9797 wrote:Don't the amber's need to be wired 2 and 2, not all together??

It was done both ways I think. For example, a Darley 3 bulb would show yellow in all directions when changing.

Then I couldn't connect this light to my Darley controller without re-wiring the signal.

Yeah, if your Darley only does yellow overlap in one direction at a time and the GE has all 4 yellows wired together, you would have to separate the yellows in the GE.

by **jab8356** on Sat Aug 10, 2013 8:57 am

...or you could rewire your Darley controller so that it lights yellow on all three sides whenever a clearance comes up (like a 3 bulb) and then the GE would work as is. To rewire the Darley controller, just put a jumper wire between both yellow outputs.

by **mcha9797** on Sat Aug 10, 2013 9:52 am

jab8356 wrote:...or you could rewire your Darley controller so that it lights yellow on all three sides whenever a clearance comes up (like a 3 bulb) and then the GE would work as is. To rewire the Darley controller, just put a jumper wire between both yellow outputs.

I'll re-wire the GE, I like the Darley the way it is.

by **mcha9797** on Sat Aug 10, 2013 9:29 pm

I thought I could get this signal up and going the last couple days, but I had too many "Honey Do's" this weekend to get it hung and wired up, I always have next weekend. :yes:

It's ready to hang, but I have to go back to work tomorrow. :cry:

I'll hang it the way it is, till it comes up on the list for restoration, it has a lot of character the way it is. :2Cool:

by **mcha9797** on Sun Aug 11, 2013 8:39 pm

Finally got it on the ceiling and hooked up to the Darley, there's just 3 lenses in so far, more pic's later.

by **mcha9797** on Mon Aug 12, 2013 11:26 am

Got the rest of the lenses in, ended up with nine 27's, (two with slight flaws) one green GE brick, one amber Econolite brick, and a red CH T3.

These pic's are better than the ones I took last night, the yellow overlap is kind of cool on this light!! Since it was wired that way when I received it, that's the way it will stay. :yes:

A few pic's of the GE, Eagle, and Darley, doin' their thing. :2Cool:

SignalTraffic Forums

Last Stray Signal Made it Home!!

Re: Last Stray Signal Made it Home!!

Re: Last Stray Signal Made it Home!!

Re: Last Stray Signal Made it Home!!

Re: Last Stray Signal Made it Home!!

Re: Last Stray Signal Made it Home!!

Re: Last Stray Signal Made it Home!!

Re: Last Stray Signal Made it Home!!

Re: Last Stray Signal Made it Home!!

Re: Last Stray Signal Made it Home!!

Re: Last Stray Signal Made it Home!!

Who is online