SignalTraffic Forums

by **Miles** on Sat Sep 01, 2007 11:05 pm

Hey guys, i need help please, i have this controller, Traconex 390, but nothing to power it with,i would like to atleast power it up just to make the controller run, not connected to signals or anything, can i have some advice as to an easy way to wire power up to it. Really what im looking for is in the connector where each prong has a letter to identify it, which ones are for the power input and output, i see about 3 or 4 different ones that look to be for power but what would i really need for them as to power, there are two fuses 24 V A1 and 115V A1. How exactly could i do this, can someone please explain?

Thanks,

Miles

by **EdT.** on Sun Sep 02, 2007 11:10 am

Miles,

Have you seen the page on the NEMA Traconex 390 over at the Traffic Signal Museum? You might try shooting Jerry (the Traffic Signal Museum's curator) an email with your questions. He's also a member here, so hopefully he'll see this message, but I'm not sure how often he checks in here...

There was recently a question about a Traconex HMP-40 posted on the MSN SignalFan group: http://groups.msn.com/SignalfansClub/controllerqa.msnw?action=get_message&mview=0&ID_Message=84476&LastModified=4675637425259421952, and they recommended checking with an eBay seller (trafficsignaltechnology) for a manual. Perhaps he has 390 manuals as well?

And if you're not a member of the signalfan group, then you should certainly remedy that right away! Lots of great info to be found on there (with a bit of digging), just try to ignore all the hostiles. :roll:

You can follow the link for joining at this link - signalfan club.

Best of luck and please do keep us updated on your progress.

Cheers,
Ed T.

by **Miles** on Mon Sep 03, 2007 1:18 pm

Thank you very much, i will look into the Signalfans club and ebay sellers. I sure will keep you all updated on my progress.

Thanks,
Miles

SignalTraffic Forums

Traconex 390

Traconex 390

Re: Traconex 390

Re: Traconex 390

Who is online