SignalTraffic Forums

Posted: **Wed Nov 13, 2013 3:05 pm**

Hi Folks,

Removed all the masking off the cabinet today.

Front view.

Side views.

Back view.

All the other aluminum parts have been painted with the exception of a couple of door hinge brackets. Will clear coat all the parts before and during assembly. All the brass machine screws and bolts have been cleaned and polished. Once installed, these will be clear coated to protect from corrosion.

Cheers!

Posted: **Fri Nov 15, 2013 1:01 am**

Looking nice! Can't wait to see it when you have it all put together! :clapping:

Posted: **Sat Nov 16, 2013 9:46 am**

Hi Folks,

Started rebuilding the Plessey signal.

Installed the latching studs, hinges and doors.

We will have the brass parts showing. Replaced the steel screws with brass on the door hinges. Depending on weather, this light may be finished and mounted by Sunday.

Cheers!

Posted: **Mon Nov 18, 2013 9:22 am**

Hi Folks,

Here are more photos showing the completion of the Plessey Tin Lantern.

This is the top end cap with the TS-12 sequencer with power wire and light harness assembly.

Top end cap installed.

Bottom end cap.

Another angle showing assembly.

View inside cabinet "looking up" towards the top. The sequencer is mounted inside of the upper end cap will provide better protection from moisture.

Continued assembly. Glass lenses installed.

Reflectors installation.

Door closed and testing sequencer.

This is after we mounted to the post on the deck.

Cheers!

Posted: **Mon Nov 18, 2013 9:38 am**

Hi Folks,

Below are photos of the Plessey Tin Lantern Signal completed.

Daytime video of signal operating.

Evening video of the Plessey Signal going through the full sequence of lights.

We now consider this project finished! :grin:

Cheers!

Posted: **Mon Nov 18, 2013 3:09 pm**

As you always seem to do, this is a beautiful job.

Thanks for sharing!

Posted: **Tue Nov 19, 2013 7:16 pm**

Great job as usual. Looks really nice!!! :drool:

SignalTraffic Forums

Guess we are restoring a Plessey Tin Lantern

Re: Guess we are restoring a Plessey Tin Lantern

Re: Guess we are restoring a Plessey Tin Lantern

Re: Guess we are restoring a Plessey Tin Lantern

Re: Guess we are restoring a Plessey Tin Lantern

Restored Plessey Tin Lantern Completed

Re: Guess we are restoring a Plessey Tin Lantern

Re: Guess we are restoring a Plessey Tin Lantern