Using an old award picture frame thing I didn't use much, I stuck on a reused arduino-relay combo wire-tied to a Lego grid board thing from one of my earliest controllers. The power strip supplies power to the USB adapter (to the Arduino and relays) and to the relays' output areas where it gets directed to the LEDs/bulbs when it's supposed to. That ground bar is there to make it easier to split 1 hot to 4 hots, in the past I would make wire+wirenut webs and those are just messy.
Arduino code for anyone who wants it
Here's the whole board nailed to the wall, the Leotek will block most of it later on.
All wired up, ready to go.
And the end result:
Sure the relays are noisy, but I like it.
