SignalTraffic Forums

by **Crunge98** on Wed Oct 16, 2013 2:17 pm

khardy wrote:Hi Jay,

Plan to use the rear board. Have it already primed for paint. Will use it to mount the terminal strip and the electronic sequencer. As to the bracket mounts, they are sitting with all the other brackets and flat metal we have. Usually never toss anything like that for it could come in handy on a later project or repair.

Cheers!

I keep everything also :thumbsup:

by **khardy** on Sun Oct 20, 2013 6:35 pm

Hi Folks,

We have most of the control box painted. If all goes well, we should have it installed in a couple of days.

Cheers!

by **Crunge98** on Mon Oct 21, 2013 7:24 am

Looking good :thumbsup:

by **khardy** on Mon Oct 21, 2013 6:33 pm

Hi Folks,

Another update for the future archive.

The conduit hubs are mounted to the post. Have glued the new gaskets and used the covers I had made to hold them in place while the glue dries.

Started applying clear coat to the control cabinet and door. Hope to have all the clear coat on tomorrow and maybe the box set into place on the post.

Cheers!

by **Troy** on Tue Oct 22, 2013 10:43 am

Neat

by **khardy** on Tue Oct 22, 2013 9:16 pm

Hi Folks,

Mounted the control box this afternoon onto the post.

Mounting hubs attaching the box to the post.

Started the assembly on the controller box back panel this morning.

If all goes well, the panel will be installed and connected tomorrow.

Cheers!

by **khardy** on Sun Nov 10, 2013 1:46 pm

Hiya Folks,

Trying to finish this project before this site is completely archived.

Today we installed the control box back panel and wiring on the monster set up.

Wiring is now complete.

We have a little work to do on the door and rope seal before installing. Hope to paint the lettering on the cross street signs for the top of the post within a few days.

Cheers!

by **Crunge98** on Sun Nov 10, 2013 2:22 pm

Very Nice!!! :drool:

by **mcha9797** on Sun Nov 10, 2013 3:11 pm

Great work as usual Keith!!!! :2Cool:

by **vaughnsimon** on Sun Nov 10, 2013 6:53 pm

I love it!

SignalTraffic Forums

CH Disassembly/Assembly Line - en Masse

Re: CH Disassembly/Assembly Line - en Masse

Re: CH Disassembly/Assembly Line - en Masse

Re: CH Disassembly/Assembly Line - en Masse

Re: CH Disassembly/Assembly Line - en Masse

Re: CH Disassembly/Assembly Line - en Masse

Re: CH Disassembly/Assembly Line - en Masse

Re: CH Disassembly/Assembly Line - en Masse

Re: CH Disassembly/Assembly Line - en Masse

Re: CH Disassembly/Assembly Line - en Masse

Re: CH Disassembly/Assembly Line - en Masse

Who is online