SignalTraffic Forums

by **DFWSignals89** on Wed Apr 17, 2013 8:50 pm

Now is a time to get some pictures!!!!!

by **John3250** on Wed Apr 17, 2013 8:59 pm

I sent some to another menber and asked him to post them hope he does soon or the next thing I will need some one to walk me throught it and will do it

thanks John

by **traffictechgreg** on Thu Apr 18, 2013 5:34 pm

John3250 wrote:I sent some to another menber and asked him to post them hope he does soon or the next thing I will need some one to walk me throught it and will do it

thanks John

I posted the photos John sent me on my Flickr account - enjoy!

http://www.flickr.com/photos/gdbtraffic/sets/72157633278608450/

by **2070** on Thu Apr 18, 2013 6:47 pm

traffictechgreg wrote:I posted the photos John sent me on my Flickr account - enjoy!

http://www.flickr.com/photos/gdbtraffic/sets/72157633278608450/

Good News, I do not have to work on them!!!! :Phil:

by **EPAC-EPIC-MARC** on Thu Apr 18, 2013 7:46 pm

Those look sweet! Like a beefed up mechanical controller :crazy:

by **RYGDWW** on Thu Apr 18, 2013 8:00 pm

Nice looking controller!

by **John3250** on Thu Apr 18, 2013 9:26 pm

thank you for posting the photos for me.
more to come as soon as I get it working.

Pete and thanks for the controller

by **John3250** on Thu Apr 18, 2013 11:08 pm

well put power to the cabinet and it looks like it works no lights on it more to come.
BUT when you call any phase unit and if there is a green light for that phase and you are holding a call it WILL NOT leave that phase untill the call is removed. it like goes into stop time mode once the call is remover it will run normal. If I put ON all the recall switches it will run normal, it only goes into stop time when you hold an ext call. I think the max time was controlled by the ET-248 that was set up also on this cabinet. I got a ET-248 to hook up BUT again it was not from this cabinet so more to learn.

Any one here have every seen a ET-300 set up with a ET-248 working? If so help.

thanks John

by **John3250** on Fri Apr 19, 2013 1:22 pm

well got the cabinet working with the ET-248 unit

but need dial pins like you use for the ET-225 or EF-20 controllers

need 3 number 3, 4 and 5 place also about 25 number 1 place and help would be great on this or any thought where to order any?

thanks John

by **TacomaJoe** on Fri Apr 19, 2013 2:00 pm

Translating to EF talk; you're looking for 25 impulse keys, 3 R1, 3 R2 and 3 R3 keys. If so, I've got you covered. I also found manuals for ET-600 and ET-800 that I can scan.

SignalTraffic Forums

Eagle ET-300 cabinet

Re: Eagle ET-300 cabinet

Re: Eagle ET-300 cabinet

Re: Eagle ET-300 cabinet

Re: Eagle ET-300 cabinet

Re: Eagle ET-300 cabinet

Re: Eagle ET-300 cabinet

Re: Eagle ET-300 cabinet

Re: Eagle ET-300 cabinet

Re: Eagle ET-300 cabinet

Re: Eagle ET-300 cabinet

Who is online