
Stands 16 feet tall, the face is 3 feet in diameter. Controls in the bottom.

Fairly simple guts, compared to an Eagle EA controller.

One face hasn't worked for over 5 years. Turns out to be a bad motor. There are two motors for each face. A 1 RPM is for normal operation but there is also a 10 RPM motor that is used to fast forward for time setting.
I'm working on this on my spare time. A little cleaning and some new lamps and we're in business.


I plan on replacing the motors for both faces and hopefully it will run another 20 years. There were a couple of stuck screws so I'm tapping all of them up to 10-32 and using hex cap SS screws to hold the bezels on.